Description
- Clutch/flywheel removal and installation become a one-man job.
- Tilting saddle enables clutch to be positioned in either horizontal position
- for clearing underneath truck or vertical position for installation and removal.
- Adjustment bolt-on saddle aligns clutch and flywheel.
- Spline shaft rotates 360 degrees, turns left and right for the clutch and engine alignment. 2” and 1 3/4” spline shafts included.
- Conveniently located release valve and 360-degree rotating pump handle allow the jack to be operated in any work position.
- Open stance for ease of access to the work.
- Unique linkage design raises the load from horizontal to vertical as the pump is cycled
- Eliminates any lifting of the clutch by the operator.
- Handles 14 inch and 15-1/2 inch clutch assemblies weighing up to 250 pounds.
- The pump handle rotates a full 360 degrees for use in any position.
- Handles 14″ and 15½” clutch assemblies weighing up to 250 lbs.
- Swivel casters provide easy maneuverability. Includes a 2″ splined shaft
- With a 1¼” pilot to aid in alignment.
- 360º swivel head.
- Minimum height of 15″ allows access below side faring.
- When raised, the centerline of the clutch will be 38¼” off the floor.
- The floor space is 32-3/8″ long by 24½” at the widest point.
- Makes the task an easy, one-person job.
Download pdf: Arios-A2273
